|
|
RE202-AWA RE212-AWA (Glassware A) |
RE202-BWA RE212-BWA (Glassware B) |
REV202M-AWA REV212M-AWA (Glassware A) |
REV202M-BWA REV212M-BWA (Glassware B) |
Performance*¹ |
Operating ambient temp. range |
5~35°C |
Speed range |
5~315 rpm*³ |
Evaporation capacity |
Up to 23 ml/min (water) |
Functions |
RPM display |
Digital display / Encoder dial setting |
Rotation mode |
Forward/Reverse/Auto reverse |
Spring-loaded jack |
Manual balance (Max. height 200 mm, stepless regulation, one-touch lock) |
Configuration |
Vacuum controller |
--- |
--- |
VR102S, installed above jack handle with attachment bracket |
Vacuum control solenoid valve |
--- |
--- |
OVR10, installed in the rear of stand base |
Rotary motor |
DC brushless (simple servo) |
Condenser retention |
--- |
Condenser bracket |
--- |
Condenser bracket |
Safety Functions |
Rotary evaporator |
DC motor: Motor overload protection, overvoltage, low voltage, rotation speed sensor error AC adapter: Short circuit in internal circuit, overcurrent protection, overvoltage protection |
Vacuum controller |
--- |
--- |
Communication error, Pressure sensor error, Memory error, Leak error, High pressure error, Auto leak at error occurrence |
Standard |
Cooling condenser |
Double corrugated tube (cooling surface: 0.143 m²) |
Suction port: GL-14 (lower), Φ10 nozzle |
Suction Port: GL-14 (upper), Φ10 nozzle |
Suction port: GL-14 (lower), Φ10 nozzle |
Suction Port: GL-14 (upper), Φ10 nozzle |
Cooling port: GL14 (two places in lower part), two φ10 nozzles |
Compatible evaporation flask |
0-2000ml for TS24. Use optional reducer to attach small flasks. |
Compatible receiving flask |
100-2000 ml |
External dimensions*² (W x D x H) |
719 × 324 × 534 |
529 × 324 × 745 |
719 × 324 × 534 |
529 × 324 × 745 |
Overall dimensions*² (W x D x H) |
744 × 365 × 534 |
554 × 365 × 745 |
744 × 365 × 534 |
554 × 365 × 745 |
Power rating 50/60Hz |
RE202 and REV202M: 100-115V 1A with plug RE212 and REV212M: 200-230V single phase 1A no plug, round terminal |
Weight |
~10.0 kg (main unit only) |
~10.5 kg (main unit only) |
Included Accessories |
Main unit |
AC adapter (1), power cable (1), bath guide (1), rear cover (1), single-sided tape fastener roll (1), double-sided tape fastener roll (1) |
Glass set |
Cooling condenser (type A/B)(1), rotary joint (1), evaporation flask (1), receiving flask (1), ball joint clamp (1), flask clip (1), vacuum seal (1), condenser insulation kit (1), condenser bracket (1) (for type B), hex wrench (1) (for type B) |
List Price |
$ 2,230 (with diagonal condenser and water bath) |
$ 2,360 (with vertical condenser and water bath) |
$ 3,720 (with diagonal condenser and water bath) |
$ 3,850 (with vertical condenser and water bath) |