Forward Curved Model FC111 1/2HP Roof Mount Exhaust Blower with Drain Fitting, Weather Covering, and spring rail mounts

Manufacturer: CB

Model: FC111 1/2HP

Condition: New. Ships directly from the manufacturer.

Estimated lead time: Typically ships in 4-5 weeks from order and payment.

Warranty: CB warrants that each blower manufactured by the Company shall be free from defects in material and workmanship under normal use and service for a period eighteen (18) months from the date of shipment or twelve (12) months from date of original installation, “whichever occurs first.” 

Includes:

• FC111 forward curve blower 1/2HP
• Motor and drives installed
• Drain Fitting
• Weather Cover
• Spring Rail Mounts

Customer is responsible for roof mount installation and ductwork connections.

Features:

• Superior Quality for your laboratory exhaust requirements.
• Airstream Integrity isolated from fan exterior and motor housing compartment.
• Airtight inlet and discharge connections.
• Shaft Seals contain corrosive and/or hazardous fumes.
• Steel Wheels are standard. Spark-resistant AMCA "B" aluminum wheels or corrosion resistant stainless steel wheels are available when required.
• Special Coatings available:
  1. Epoxy for mild corrosive fumes and temperatures below 180º F.
  2. Cen-FP (fluoropolymer) for severe corrosive fumes such as nitric, sulfuric or perchloric acids.
• Wheels are balanced after coating
• Belt Driven fans are AMCA licensed for air performance.
• All fasteners in airstream are stainless steel.

Recommended CFM 100 through 1000 CFM

Specifications

•  Standard air flow (100 fpm)
• FC 111-1/2HP Forward curved exhaust blower, 10 inch dia wheel
•  Air moving capacity: 1170cfm @100fpm
  
• Motor: 110V/220V Capacitor Start ODP
• Wheel Diameter:  9 1/8" X 4 5/8"
• Rated for up to two 90 degree elbows

Exhaust Blower Options:

• Enhanced air flow (150 fpm)-Net add $152.40
  
  •  FC112-1/2HP Forward curved exhaust blower, 12 inch dia wheel
  •  Air moving capacity: 1375cfm @150fpm
  •  Motor: 110V/220V Capacitor Start ODP
• Epoxy coated fan blade housing to reduce corrosion from most normal exhausts [not recommended for temperatures over 180F.-$414
• Explosion-proof motor - $550 (spark-resistant aluminum fan blade is additional and required with this)
• Spark-resistant aluminum fan blade -$180
• Vent stack-Request quote
• Inlet and outlet protective screens-Contact us for quote
• Cen-FP, a fluoropolymer resin coating especially resistant to highly corrosive chemicals such as nitric and sulfuric acids. Withstands a wide range of temperatures. -$1,242