Cascade Sciences CVO-5 Pro Vacuum Oven and Pump System 4.5 cu ft. – Government Lab Enterprises

Cascade Sciences

Cascade Sciences CVO-5 Pro Vacuum Oven and Pump System 4.5 cu ft.

  • Sale
  • Regular price $14,807.41

Shipping calculated at checkout.


Cascade Sciences CVO-5 Pro Vacuum Oven and Pump System 4.5 cu. ft.

Manufacturer: Cascade Sciences

Model: CVO-5 Pro

Condition: New

The CVO-5 PRO Package pairs our CVO-5 vacuum oven with the Agilent IDP7 5.4 cfm oil free scroll pump and our fast MAXEVAP connection kit.  It’s an ideal benchtop set-up for high production vacuum drying or purging. The Agilent scroll pump pulls deep vacuum to 5 x 10-2 torr range and has a low cost of ownership. It can be maintained and cleaned in house.

CVO-5 PRO Package Includes

  • CVO-5 Vacuum Oven
  • 5 removable, height adjustable aluminum shelves
  • The clean, quiet Agilent IDP7, 5.4 CFM oil-free scroll vacuum pump
  • Cascade’s MAXEVAP Connection Kit

CVO-5 Vacuum Oven Features

  • NRTL Certified by TUV
  • 5 each adjustable shelves
  • Stable temperature control. Digital temperature readout with temp sensor INSIDE the oven
  • Solvent resistant BUNA door gasket
  • Bright LED lights in window for visibility of sensitive material
  • Touchscreen LED Control Panel with adjustable settings
  • Smooth, quarter-turn vacuum and vent valves
  • Energize vacuum pump from control panel
  • Rear KF-25 port allows for rapid MAXEVAP purging or running feedthroughs inside oven for monitoring
  • 120V or 220V power options are available
  • Quality Tempered Rated Glass NGI-US to ANSI Z97.1.2007  156CFR/201 11  SGCC -2577 ½ UA
  • Adjustable leveling feet insure your unit sits solid and level in the workspace

Agilent IDP7 Oil-Free Scroll Pump Features

  • Less noisy that diaphragm or oil-rotary vane pumps
  • No Inlet / Exhaust Filters Required
  • Hour Meter For Tracking Service Intervals
  • 1 Year Warranty
  • NRTL Certified
  • Expert Rebuild/Maintenance Available from Cascade
  • Maintenance is the replacement of a single interior tip seal. Order our IDP7 Tip Seal Replacement Kit or ask us about our maintenance service.
  • Pull Deeper Vacuum / Better Vapor Tolerance With Two Gas Ballast Positions.The IDP-7 has two gas ballast ports that assist the pump in handling condensable gases such as water vapor, or other gaseous products that become liquids or solvents when reaching atmospheric pressure. With neither of the gas ballast ports open, the IDP-7 has a base pressure of 20 mTorr.
  • Port in position 1 provides for ~ 12 grams per hour of water vapor pumping, and limits the base pressure of the pump to not less than 200 mTorr.
  • Port in position 2 provides for ~ 120 grams per hour of water vapor pumping, and limits the base pressure of the pump to not less than 1 Torr.

      Specifications

      110V – 120V / 1ph / 14A  50/60Hz
      Cord Included
      NEMA 5-15 Cord/Outlet

      1105 BTU/hr
      Rating at max power

      220V – 240V / 1ph / 7A 50/60Hz
      Cord Included
      NEMA 6-15R Cord/Outlet

      1228 BTU/hr
      Rating at max power

      VACUUM PUMP POWER
      Selectable:
      100-120 VAC, 1PH, 50/60 HZ, 6 A typical
      200-240 VAC, 1PH,  50/60 HZ, 3 A typical

      VACUUM PUMP EXHAUST
      KF-16 Flange with 8′ Tubing
      Exhaust to Fresh Air Source

      MODEL CVO-5 (TVO-5)

      VOLUME
      4.5 Cubic Ft.

      INTERIOR
      18”W x 24”D x 18”H
      457mm x 609mm x 457mm

      EXTERIOR
      26.5” W x 34.5” D x 32.3”H
      673mm x 876mm x 819mm

      TEMPERATURE RANGE
      Low Temperature Processing Range: 26°F to 250°F (121°C)
      Temperature Uniformity: +/- 1.5°F @ 105°F (40.5°C)
      Temperature Stability: +/- 0.4°F @ 105°F(40.5°C)
      Heat Up / Stabilization Time to 250°F: 120 minutes (to minimize overshoot)

      High Temperature Processing Range: to 428°F / 220°C available
      Temperature Uniformity: +/- 6.5% of setpoint

      Ambient laboratory conditions can affect temp performance

      VACUUM VALVE
      ¼ Turn Lever

      VENT VALVE
      ¼ Turn Lever

      INTERIOR LIGHTING
      LED Strips (Rated to 150C)

      GLASS WINDOW
      Tempered NGI-US to ANSI Z97.1.2007

      VACUUM GAUGE
      Reads in inches mercury or torr (Selectable)

      TEMP CONTROLLER
      Touch Screen
      Accurate Within 1°F
      Independent Overtemp Failsafe

      PORTS (Rear)
      Vacuum = 3/8th Barb
      Vent = ¼” Barb
      Auxiliary KF-25 Port
      Data:  Log temp & vacuum levels

      INERT GAS INTRODUCTION
      Yes. Via ¼” Vent Barb
      15 psi max inlet pressure

      POWER OPTIONS
      110V – 120V / 1ph / 14A  50/60Hz
      Cord Included
      NEMA 5-15 Power Outlet

      220V – 240V / 1ph / 7A 50/60Hz
      Cord Included
      NEMA 6-15R Power Outlet

      SHELVES
      Adjustable Height
      Removable
      5 Each Included / 8 Max
      50lbs Per Shelf Max
      Area – 215 Cubic Inches

      INCLUDED ACCESSORIES
      5 Shelves
      20 Clips
      4 Leveling Feet
      Power Cord

      DOOR GASKET
      18” x 18”
      Solvent Resistant BUNA Standard
      221°F to 105°C Rated

      High Temp Silicone – Optional
      Rated to 446°F to 230°C

      Viton – Optional
      Rated to 401°F to 205°C

      WEIGHT
      360 lbs / 163.3 Kg
      Shipping
      449 lbs / 207.3 Kg

      SHIPPING DIMENSION
      41”L x 41”W x 45”H
      Class 85

      CERTIFICATIONS
      ISO 9001
      NRTL TUV #U8 170464972 077
      CAN/CSA-C22.2 No. 61010-1:2012
      + UPD No. 1:2015-07 + UPD No. 2:2016-04
      CAN/CSA-C22.2 No. 61010-2-010:2015
      UL 61010-1:2012/R:2016-04
      UL 61010-2-010:2015
      EN 61010-1:2010
      EN 61010-2-010:2014

      WARRANTY
      1 Year
      Gaskets not included

      AGILENT IDP7 VACUUM PUMP
      Oil-Free, Scroll Vacuum Pump
      5.4 CFM  /  9.1 m3/hr
      2 x 10-2 Torr / 20 mTorr
      120V / 1ph (220V available)
      Intake Connection KF-25
      1/2″ Hose Barb Exhaust
      L 14.72” x W 10.24” x H 10”
      Weight 21 lbs

      Documents

      Cascade Sciences Vacuum Ovens Manual

      Agilent IDP7 vacuum pump

      NRTL Certifications